Specification
Bag material 1680D
Bag color Camouflage color or OEM color
Open size锛?MM锛?/td>1480*580*5MM
Folding size 锛圡M锛?/td>370*580*15 MM
Foldinjg thickness 锛圡M锛?/td>15
Net weight 锛圞G锛?/td>6.50 KG
Solar Cell Monocrystalline Shingle Type
Efficiency rate 0.21
Maximum power(W锛?/td>140
Power Tolerance 卤3%
Voltage at max power(Vmp) 锛圴锛?19.6 V
Current at max power(Imp) 锛圓锛?7.14 A
Open circuit voltage(Voc) 锛圴锛?/td>23.2 V
Short circuit current(Isc) 锛圓锛?/td>7.89 A
Operating Temperature 锛堚剝锛?/td>-20 to 50鈩?/td>
Maximum System Voltage 锛圴锛?/td>1000V
Maximum Series Fuse Rating锛圓锛?/td>10A
Standard Test Condtion Irrandiance 1000W/銕?br/>Module temperature 25鈩?AM=1.5
Warranty Power is not less than 90% in 5 years
Application ClassClass A
Noct 46鈩?卤 2鈩?
Current temperature coefficient 0.05%/掳C
Voltage temperature coefficient - 0.35%/掳C
Power temperature coefficient - 0.45%/掳C
Why use ETFE film?
1.ETFE, ethylene-tetrafluoroethylene copolymer, this material has the corrosion resistance of polytetrafluoroethylene, overcomes the defect of non-stickiness of polytetrafluoroethylene to metal, and its average linear expansion coefficient is close to that of carbon steel , Making ETFE (F-4 an ideal composite material with metals.
2.The thickness of EFTE membrane is usually less than 0.2mm, and its unique anti-adhesion surface makes it highly resistant to dirt. With the characteristics of cleaning, rainwater can usually clean the main dirt.
3.EFTE has a life span of 25 to 35 years and is a recyclable material. Reach the B1 fire rating standard. The light transmittance can be controlled at 50%~95%. According to the geometric conditions and the number of film layers, its k value can reach 2.0W/m2k.
4.ETFE film has strong self-cleaning properties. Because the friction coefficient of the ETFE film itself is very small, dust and dirt are "untenable" on this slippery surface. Even if there is some floating dust on the surface, as long as it rains, the membrane on the facade can be washed clean.
5.The adjustment of light is attributed to the silver dots on the inner transparent ETFE film. The dot matrix formed by these plating dots can change the direction of light, which has the effect of heat insulation and astigmatism. The required light can pass freely to ensure the temperature and lighting of the venue.Portable Solar Panel
website:http://www.flag-sunsolarpanel.....com/portable-solar-p
